1,255 research outputs found
Metal-free C-H functionalisation methods
Previously held under moratorium from 1 December 2016 until 6 December 2021This thesis describes the development of two metal-free C–H functionalisation methods which encompass oxidations of sp³- and sp²-hybridised C–H bonds.Chapter 1 provides a brief introduction to the rapidly growing area of C–H functionalisation and outlines selected metal-catalysed and metal-free C–H functionalisation methods. Chapter 2 describes the development of a novel metal-free C–H functionalisation method of alkanes, from concept, through initial investigations, optimisation and substrate scope to mechanistic studies. Chapter 3 gives a detailed account of the development and mechanistic investigations of peroxide-mediated C–H functionalisation method exclusive to aromatic C–H bonds. Chapter 4 presents the experimental data obtained in the process of developing the new methodologies described herein. Chapter 5 contains an appendix. Chapter 6 contains a bibliography.This thesis describes the development of two metal-free C–H functionalisation methods which encompass oxidations of sp³- and sp²-hybridised C–H bonds.Chapter 1 provides a brief introduction to the rapidly growing area of C–H functionalisation and outlines selected metal-catalysed and metal-free C–H functionalisation methods. Chapter 2 describes the development of a novel metal-free C–H functionalisation method of alkanes, from concept, through initial investigations, optimisation and substrate scope to mechanistic studies. Chapter 3 gives a detailed account of the development and mechanistic investigations of peroxide-mediated C–H functionalisation method exclusive to aromatic C–H bonds. Chapter 4 presents the experimental data obtained in the process of developing the new methodologies described herein. Chapter 5 contains an appendix. Chapter 6 contains a bibliography
Solitons and vortices in ultracold fermionic gases
We investigate the possibilities of generation of solitons and vortices in a
degenerate gas of neutral fermionic atoms. In analogy with, already
experimentally demonstrated, technique applied to gaseous Bose-Einstein
condensate we propose the phase engineering of a Fermi gas as a practical route
to excited states with solitons and vortices. We stress that solitons and
vortices appear even in a noninteracting fermionic gas. For solitons, in a
system with sufficiently large number of fermions and appropriate trap
configuration, the Pauli blocking acts as the interaction between particles.Comment: 4 pages, 5 figures many new result
Post-outburst spectra of a stellar-merger remnant of V1309 Scorpii: from a twin of V838 Monocerotis to a clone of V4332 Sagittarii
We present optical and infrared spectroscopy of V1309 Sco, an object that
erupted in 2008 in a stellar-merger event. During the outburst, V1309 Sco
displayed characteristics typical of red transients, a class of objects similar
to V838 Mon. Our observations were obtained in 2009 and 2012, i.e. months and
years after the eruption of V1309 Sco, and illustrate severe changes in the
remnant, mainly in its circumstellar surroundings. In addition to atomic gas
observed in earlier epochs, we identified molecular bands of TiO, VO, HO,
ScO, AlO, and CrO. The infrared bands of CrO we analyse are the first
astronomical identification of the features. Over the whole period covered by
our data, the remnant was associated with a cool (1000 K) outflow
with a terminal velocity of about 200 km/s. Signatures of warmer atomic gas,
likely to be still dissipating the energy of the 2008 outburst, dramatically
decreased their brightness between 2009 and 2012. In addition, the source of
optical continuum disappeared sometime before 2012, likely owing to the
formation of new dust. The final stage of V1309 Sco's evolution captured by our
spectra is an object remarkably similar to an older red transient, V4332 Sgr.
In addition to providing a detailed view on the settling of the eruptive
object, the observations presented here reinforce the conclusion that all the
Galactic red transients are a manifestation of the same phenomenon, i.e. a
stellar merger. The late spectra of V1309 Sco also suggest peculiarities in the
chemical composition of the remnant, which still need to be explored.Comment: to appear in A&
ACCURACY ANALYSIS OF THE CURVED PROFILE MEASUREMENT WITH CMM: A CASE STUDY
In the paper, analysis of the curved profile measurement accuracy is described. Since there was no CAD model or other reference profile for the measured detail, the first step was to generate the reference contour of the cam using the technical drawing and tolerance requirements. The test campaign consisted of three experiments aimed at determining the effect of scanning velocity on the results of form deviation δ measurement, evaluation of deviation δ measurement uncertainty and the measurement repeatability. The scanning time was checked, too. The obtained results demonstrated feasibility of the chosen CMM and measurement strategy. It was found also that the measurement uncertainty did not depend on the scanning sampling step from 0.05 to 0.2 mm, and the true measurement time was for 30-40% longer than that expected from the nominal scanning velocity
DESIGN AND CALIBRATION OF THE SYSTEM SUPERVISING BELT TENSION AND WEAR IN AN INDUSTRIAL FEEDER
In the paper, the issue of the supervision of belt tension and wear in industrial feeder is addressed. The designed system is based on strain gauges that are built into the roller and are subject to the belt pressure at each revolution. In order to assess the effectiveness of this system, calibration and uncertainty analysis was performed. As a result, it was demonstrated that the main source of uncertainty was the function of approximation, while the others were orders of magnitude smaller. The final function provided results with accuracy of ca. 10% of actually measured value, which was assumed to be a good result for this particular industrial application
Analysis of the planar point identification accuracy in CMM measurements
The paper presents the results of the investigations on the direction-dependent accuracy of the point identification during contact probe measurements with a coordinate measuring machine (CMM). Considering the contact point identified by an orthogonal to the surface probe movement, the transformation of coordinates was made in order to calculate the displacement of the measured point. As a result, the positioning accuracy was estimated in three axes. The experiments demonstrated a strong dependence of the displacement on the declination angle. Moreover, it was found that the directional surface texture which provided different roughness in perpendicular directions, had an impact on the positioning accuracy.Web of Science2218art. no. 700
International competitive position of the Polish selected food markets
Purpose: The aim of the article was to evaluate the current situation and changes of the international competitive position of selected Polish food markets. Design/Methodology/Approach: To quantify the evaluation of competitiveness, ratio analysis was used. Indicators of the Revealed Comparative Advantage (RCA), Lafaya Index (LFI) and Specialization Indicator (SI) were calculated. The research covers the years 2004-2018. Findings: The research of the foreign trade of polish agri-food sector showed that its role in the analyzed period in the Polish economy is becoming stronger. The main food industries in export are meat and processed meat, tobacco and cigarettes, dairy products, and fish and fish products. The research results enable us to identify international specializations of the Polish agri-food branches in the analyzed markets, namely the tobacco and meat and fish processing industries in the EU-15 market, meat and offal in the EU-13 market, and the dairy industry in markets outside the EU. Practical Implications: Based on the study and research on the subject, suggestions and recommendations may be formulated for the public administration and food industry. Originality/Value: The research results indicate long-term changes in the potential and competitive position of the industry on the international market. Therefore study serves a basis for making future decisions by directors and managers of firms in the internationalization process of agri-food sector in Poland.peer-reviewe
- …